There is a familiar house in PECHS that many Karachi families will recognise. Solidly built decades ago, generous rooms, high ceilings, thick walls — and, every summer, unbearable by mid-afternoon. The air conditioners run from morning to midnight, the west-facing rooms stay hot long after sunset, and the electricity bill arrives like a second rent. The owners have already tried the obvious fixes: a bigger air conditioner, then another one. The house is cooler in patches, but it is not comfortable, and it is certainly not efficient.
The missing idea is simple, and it is why deep retrofits exist. A house is a system. Heat gets in through the roof, the walls, the windows and the gaps around them, and it stays in because the building traps it. Adding cooling power without slowing heat entry is like filling a leaking tank with a bigger pump. A deep retrofit slows the leaks first, in the right order, so the cooling you already have finally has a chance to work.
This article explains that order for an old Karachi house: what to fix first, what can wait, and what to avoid doing backwards. You will learn why the roof usually comes first, why sealed windows alone can disappoint, and how shading — the oldest Karachi cooling trick — still beats expensive equipment when it is done properly.
Why does an old Karachi house overheat so badly?
Karachi’s climate is unforgiving to older construction in a specific way. Summer heat is intense and long, humidity stays high for months, and the sun is strong on west and south faces through the afternoon. Many older houses have uninsulated concrete roofs that absorb heat all day and radiate it into rooms at night, single-glazed windows in metal frames that conduct heat and leak air, and walls with no insulation layer at all.
Dust and sea air add to the problem in DHA and Clifton, where salt-laden air corrodes frames and seals, and fine dust finds every gap. The result is a house that heats up quickly, cools down slowly, and forces air conditioners to fight a losing battle. Comfort suffers first in the rooms people actually use in the evening — bedrooms and family lounges — which is why a retrofit should start with how the house feels at 9 p.m., not just how it performs at noon.
What is the right order, and why does order matter?
Order matters because each step changes what the next step can achieve, and because doing things backwards can lock in waste. Sealing a house tightly before dealing with roof heat, for example, can trap hot air inside. Fitting expensive windows while the roof still pours heat into the rooms will leave you disappointed in the windows, when the roof was the problem.
A sensible Karachi order looks like this:
- Reduce heat entry from above. Insulate the roof and improve its reflectivity, so the largest heat source is dealt with first.
- Control the sun before it hits the glass. Add external shading to west and south windows — overhangs, pergolas, screens or deciduous planting where space allows — so sunlight is stopped outside, not inside.
- Seal and upgrade windows and doors. Repair frames, replace worn seals, and upgrade glazing where the frame and budget allow, so cooled air stays in and hot, dusty air stays out.
- Insulate walls where it is practical. In a deep retrofit this may mean external or internal wall insulation on the worst-exposed faces first, not necessarily the whole house at once.
- Right-size ventilation and cooling last. Once heat entry is lower, existing air conditioners often prove oversized, quieter and cheaper to run, and targeted ventilation can work without fighting constant heat gain.
This order also protects your budget. Roof insulation and shading are usually the highest comfort return per rupee in an old Karachi house. Windows are important, but they pay back best once the roof is no longer heating the house from above.
How does roof insulation work in practice?
A concrete roof in Karachi can reach very high surface temperatures in summer, and that heat moves steadily downward into the rooms below. Insulation slows that transfer. Common approaches include rigid insulation boards above or below the roof slab, reflective coatings that reduce solar absorption, and a combination of both. The right choice depends on the roof’s condition, waterproofing, access and whether a terrace or rooftop use must be preserved.
Two cautions matter. First, insulation must not trap moisture against the slab or hide a leaking waterproofing layer. Fix leaks and check drainage before insulating, or you will insulate a problem into place. Second, roof insulation works best with ventilation of the roof space where one exists, and with light-coloured, reflective finishes that reduce the starting temperature. Insulation slows heat; reflection reduces how much heat arrives in the first place. Together they are far more effective than either alone.
What about windows: replace, reseal, or shade?
All three have a place, and the honest answer depends on the window’s condition. A sound frame with failed seals and single glazing may benefit most from resealing, draught-proofing and good external shading. A corroded, warped frame that no longer closes properly is a candidate for replacement, because no seal can fix a frame that does not meet.
When comparing glazing options, remember that Karachi’s main enemy is solar heat gain, not winter cold. A window that performs well in a cold climate may not be the right choice here. Ask about solar heat gain and shading performance, not just insulation values in isolation, and check that frames, seals and hardware suit humid, salty air. For large west-facing glass in a DHA or Clifton villa, external shading will often outperform an expensive glass upgrade alone, because it stops the sun before it enters. Internal curtains and blinds help with glare and privacy, but by the time sunlight has passed through glass, much of its heat is already inside.
| Window option | When it fits, from this article |
|---|---|
| Reseal and shade | Sound frame with failed seals and single glazing; resealing, draught-proofing and good external shading |
| Replace | Corroded, warped frame that no longer closes properly, because no seal can fix a frame that does not meet |
| External shading | Large west-facing glass, where stopping the sun before it enters often outperforms an expensive glass upgrade alone |
Should walls be insulated too?
Wall insulation is the most disruptive step, so it deserves the most careful sequencing. In many old Karachi houses, the most exposed walls — west-facing walls with long afternoon sun — give the best return. External insulation changes the facade and needs detailing around windows, services and parapets. Internal insulation is less disruptive outside but reduces room size slightly and needs care around electrical points, damp and thermal bridging, where heat bypasses the insulation through an uninsulated strip.
A practical compromise for many families is phased work: roof and shading first, windows and sealing second, and the worst walls third, with the rest done during a future renovation phase. A phased plan only works if it is written down as one plan, so each phase leaves the next one possible — for example, window replacements sized and detailed to accept future external shading or wall insulation without being ripped out.
What mistakes should you avoid?
The most common mistake is buying cooling capacity instead of comfort. A larger air conditioner in a leaky, uninsulated house cools the air near the unit while walls and ceilings keep radiating heat, so the room still feels uncomfortable. Another mistake is sealing every gap without thinking about fresh air, cooking fumes and humidity. A tighter house needs controlled ventilation, not no ventilation, especially in kitchens and bathrooms.
A third mistake is chasing a single product — a miracle coating, a miracle window, a miracle insulation board — as if one purchase could retrofit a house. Deep retrofits work because the measures reinforce each other. Roof insulation lowers the load, shading lowers it further, sealing keeps the cooled air in, and only then does the air conditioner run less, quieter and cheaper.
As a rough market guide, a phased deep retrofit for a large older Karachi house often starts around PKR 1,500,000 to PKR 2,000,000 for roof insulation and shading work as of October 2026, with full window upgrades and wall insulation taking a comprehensive project well beyond that, depending on area and specification. Consider those figures a starting range for budgeting discussions, since material prices, roof condition and the extent of window work can shift the final number considerably — a detailed written quote for your house is the only reliable figure.
FAQ
What gives the biggest comfort improvement first?
In most old Karachi houses, roof insulation combined with west-facing shading. Those two measures attack the largest heat sources before you spend on windows or wall work.
Will insulation make the house damp?
Properly detailed insulation should not. Problems arise when insulation traps moisture from a leak, or when internal insulation is fitted over a damp wall without investigation. Fix water entry first, and detail junctions carefully.
Can I retrofit in phases without wasting money?
Yes, if the phases follow one written plan. Do roof and shading first, then windows and sealing, then walls, and ensure each phase leaves fixings, depths and details ready for the next.
Do I need to replace all windows at once?
No. Prioritise west and south windows, rooms used in the evening, and frames that no longer close properly. Reseal and shade the rest in the meantime.
Will a retrofit reduce load shedding discomfort?
It helps noticeably. A well-insulated, well-shaded house stays cooler for longer when power is out, because less heat is entering and the cool air already inside escapes more slowly. It does not replace backup power, but it makes outages far more bearable.
Is a deep retrofit suitable for a house I may sell soon?
Often yes, because comfort, lower running costs and a cooler evening house are visible to buyers in a way that a new air conditioner alone is not. Keep records, warranties and before-and-after bills if you can, so the improvement is easy to show.
Conclusion
An old Karachi house does not need to be demolished to be comfortable, and it does not need the biggest air conditioner on the street. It needs its leaks slowed in the right order: roof first, sun controlled outside the glass, windows sealed, walls tackled where they hurt most, and cooling right-sized last. Done that way, each rupee works harder, each room feels better in the evening, and the house that once fought the summer starts to work with it.
If your house overheats every summer despite its air conditioners, start with a survey of roof, sun and air leakage before buying more cooling. A planned home renovation in Karachi from Advanced Engineering & Construction can sequence that work so early phases are not undone by later ones. Which room in your house stays hottest after sunset — and what is heating it from above or through the glass?
For a consultation, contact Advanced Engineering & Construction at 0320-1176827, Office 34, Decent Towers, Block 15, Gulistan-e-Johar, Karachi. AEC was founded in June 2022 by Engr. Ahsan Razak and holds PEC Licence No. 17347 Category C4/E, valid until June 2027.






